SikaForce®-800 Blue

(formerly SikaForce®-7800 BLUE)

Fast curing profile and surface filler for blade repair applications

SikaForce®-800 Blue is a two component polyurethane based profile and surface filler that works best at temperature below 15 °C. If ambient temperatures are higher than 15 °C it is advisable to use SikaForce®-7800 RED.  

  • Superior mixing, application and tooling properties
  • Very good adhesion to GFRP
  • Non-sag up to layer thicknesses of approx. 20 mm
  • Fast sanding time
  • Easy to sand, does not clog the sandpaper