- Filled polyurethane resin with long potlife
- Good gliding properties
- Potlife 35 - 50´
- Low exothermic reaction
- Casting in high thickness (400 mm)
- Adhesion between successive layers
- Filled with RZ 30150 / TE Filler in order to limit exothermic reaction and to get low shrinkage
- Filled with RZ 209/6 / aluminum powder in order to improve the surface gliding
Areas of Application
- Without addition of further filler for casting of negatives, molds masters and mock-ups
- Filled version for casting of higher volumes and stamping tools
Advantages
- Low exothermic reaction
- Casting in high thickness (400 mm)
- Adhesion between successive layers
- Filled with RZ 30150 / TE Filler in order to limit exothermic reaction and to get low shrinkage
- Filled with RZ 209/6 / aluminum powder in order to improve the surface gliding
