Sika® Remover-208
Solvent-based cleaning agent for strongly contaminated non-porous surfaces
Sika® Remover-208 is a solvent-based colorless clear cleaning agent for painted substrates. It is also used to remove traces of Sikaflex® products.
- Removes heavy contaminats
- Suitable for most painted surfaces and plastics
- Available in aerosol can
PRODUCT BENEFITS
- Removes heavy contaminats
- Suitable for most painted surfaces and plastics
- Available in aerosol can
Areas of Application
Sika® Remover-208 is used to pre-clean strongly contaminated non-porous substrates. Sika® Remover-208 can be used to clean painted surfaces prior to bonding. Sika® Remover-208 can also be used to remove uncured excess of Sikaflex® adhesive or sealant from application tools or soiled surfaces. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Product Details
| Chemical base | Solvent-based | |
| Color (CQP001-1) | Colorless, clear | |
| Application temperature | 5 ─ 40 °C | |
| Application method | Wipe-on, wipe-off with lint-free paper towel | |
| Shelf life | 24 months A |
| CQP = Corporate Quality Procedure | A) stored in sealed container in up-right position in a dry place at ≤ 25 °C |
IMPORTANT NOTE
Compatibility with the actual substrate is to be verified prior the application.
Discard any Sika® Remover-208 that looses its clear appearance (contaminated).
Application
Removal of uncured material
Remove the bulk of the Sikaflex® residue with a knife or spatula. Moisten a rag or towel with Sika® Remover-208 and wipe off the remaining adhesive or sealant.
Surface Cleaning
Wipe painted surfaces with a moistened rag or towel with Sika® Remover-208. Wet the paper towel with solvent by pouring the liquid onto the cloth. Never dip the paper towel into the Sika® Remover-208 as it may contaminate it! Wipe the surface with the wetted paper towel. Use fresh paper towels regularly in order to retain the cleansing power.
Before the solvent dries on the surface (evaporates), wipe it off with a clean, dry, lint-free paper towel.
Repeat the last two steps until no contaminants show up on a white paper towel.
Do not use on sensitive surfaces such as fresh paints.
Tightly reseal container immediately after each use.