Sika® Cleaner G+P
Water-based cleaning agent for glass and plastic substrates
Sika® Cleaner G+P ia a water-based, alcohol containing, light blue transparent cleaning agent for glass, plastics and non-porous substrates. Sika® Cleaner G+P can be used for the removal of finger marks, residues and general grime. The product leaves no residue on the surface, thus ensuring easy use and no need to re-polish the glasses.
- Water-based cleaner
- Makes silicone residues visible
- Can be used on most non-porous substrates
PRODUCT BENEFITS
- Water-based cleaner
- Makes silicone residues visible
- Can be used on most non-porous substrates
Areas of Application
Sika® Cleaner G+P is used to clean screen prints on vehicle glasses. In addition it can be used for cleaning purposes on almost all non-porous substrates.Product Details
| Chemical base | Water-based containing Isopropanol | |
| Color (CQP001-1) | Light blue, transparent | |
| Application temperature | 5 ─ 40 °C | |
| Application method | Spray and wipe off | |
| Shelf life | 60 months |
| CQP = Corporate Quality Procedure |
IMPORTANT NOTE
Before applying Sika® Cleaner G+P to sensitive surfaces (e.g. plastic, paints, etc.), we recommend to test Sika® Cleaner G+P on a small, possibly non-visible area of the base material. Consider that before application of the adhesive or sealant, the surface may need to be prepared accordingly.
Application
METHOD OF APPLICATION
Apply Sika® Cleaner G+P on surface and wipe dry with a dry, clean, lint-free towel. Surfaces must be allowed to dry completely prior initiating the next step in surface preparation (e.g. activation or priming).
Sika® Cleaner G+P concentrate needs to be diluted with deionized water. The mixing ratio is 1 to 4 thus 5 l concentrate need to be diluted with 20 l deionized water.
FAQ
- New paints are difficult to bond as they are developed to be self-cleaning and repellent
- Allow the paint to properly cure first (24h)
- Use abrasive pad to scuff the surface, Sika®Cleaner G+P to clean and apply Sika®Primer-207
- If the old PU is still in place the standard procedure can be followed
- If you bond directly to FRP use abrasive pad to scuff the surface, Sika®Cleaner G+P to and apply Sika®Primer-207
- It is not recommended to dilute chemical products as compatibility is not guaranteed and the composition is designed to achieve best performance already.
- Alcohol can react with the polyurethane and block the reactive groups which affect the curing and adhesion build up.
- Move the installation to a warmer place
- Clean the glass in the warehouse before leaving for the mobile installation
- Perform a dry cleaning of the bond line with Sika®Cleaner PCA