Go
Show all documents

SikaBlock® M980

Polyurethane tooling board

SikaBlock® M980 is a slightly filled blue tooling board with high abrasion resistance for foundry pattern making, molds and tools.  

  • Very low coefficient of thermal expansion
  • Very good, dust free milling properties
  • Very high abrasion resistance
  • Very high compressive and tensile strength as well as edge stability
  • Very high swelling resistance
 
Contact
Go
Show all documents

PRODUCT BENEFITS

  • Very low coefficient of thermal expansion
  • Very good, dust free milling properties
  • Very high abrasion resistance
  • Very high compressive and tensile strength as well as edge stability
  • Very high swelling resistance
 

Areas of Application

SikaBlock® M980 is designed for foundry models, match plates and core boxes (cold box process). It is as well suited for various molds and tools, e.g. for metal sheet forming and for master models, where a high surface quality and superior strength is required.
This product is suitable for experienced professional users only. The boards must be tested for the specific application in each case, e.g. type of sand molding process, binder, amine catalyst, etc.  

Packaging

Dimensions [mm]

Pcs./ pallet

1000 x 495 x 30

1000 x 495 x 50

1000 x 495 x 75

1000 x 495 x 100

30

36

24

18

Product Details

Typical Product Data
Chemical base

Polyurethane

Color

Blue

Density

1.35 kg/l

Shore D hardness (CQP023-1 / ISO 868)

86

Compressive strength (CQP028-5 / ISO 604)

120 MPa

Flexural strength (CQP027-2 / ISO 178)

145 MPa

Flexural modulus (CQP027-2 / ISO 178)

4000 MPa

Impact resistance (CQP038-2 / ISO 179)

35 kJ/m2

Heat deflection temperature (CQP030-1 / ISO 75B)

85 °C

Linear coefficient of thermal expansion (CQP053-1 / ISO 11359)

60 x 10-6 1/K

CQP = Corporate Quality Procedure

Application

Application Information

Application

SikaBlock® M980 can be easily machined by milling, drilling, sawing or modified manually. It is recommended to use high performance tools to machine these boards.
For milling parameters check information from cutting tool manufacturers or get the General Guideline “Milling parameters for SikaBlock®” for more general information.
 

STORAGE CONDITIONS

The board needs to be stored flat over the entire surface in dry conditions.
Many models and tools are made of bonded boards, either with identical or other materials. Storage at low and elevated temperature can lead to high stresses due to the different expansion coefficients. To prevent this, it is necessary to store the models and tools at a temperature range between 15 °C and 30 °C.

 

Documents